High Sierra (10.13) Novo HD no MacBook Pro (2009) Sky. Download Olarila. Novo HD no MacBook Pro (2009) By Flavio Guimaraes, April 26. I have a 2009 Mac Pro, which has been upgraded to a MacPro5,1. It's currently running macOS Sierra. I was going to upgrade it High Sierra, but the High Sierra installer said it needs to first update the firmware and asked me to proceed in doing that. Some machines, such as the MacBook Pro (2008/9), work perfectly with no modifications, leaving you to wonder why Apple thought it necessary to drop them at all. If you have one of the models listed above and want to give Sierra a try, follow our instructions below to make a modified Sierra installer with Sierra Patcher. The older macOS High Sierra had a little more scope. Apple said that would run happily on a late 2009 or later MacBook or iMac, or a 2010 or later MacBook Air, MacBook Pro, Mac mini or Mac Pro. So I have a white 13inch MacBook mid 2009 that runs high sierra. I'm trying to download windows 7 via bootcamp, but there is no option to download windows 7, only windows 10 and later. I was trying to revert it back to El Capitan but that was a whole other ordeal. (Too old for command + R to.

To get the latest features and maintain the security, stability, compatibility and performance of your Mac, it's important to keep your software up to date. Apple recommends that you always use the latest macOS that is compatible with your Mac.

Find out how to upgrade to macOS Big Sur, the latest version of macOS.

Check compatibility

If a macOS installer can't be used on your Mac, the installer will let you know. For example, it may state that your Mac doesn't have enough free storage space for the installation or that the installer is too old to be opened on this version of macOS.

If you want to check compatibility before downloading the installer, find out more about the minimum requirements for macOS Catalina, Mojave, High Sierra, Sierra, El Capitan or Yosemite. You can also check compatible operating systems on the product ID page for MacBook Pro, MacBook Air, MacBook, iMac, Mac mini or Mac Pro.

Make a backup

Before installing, it’s a good idea to back up your Mac. Time Machine makes it simple, and other backup methods are also available. Find out how to back up your Mac.

Download macOS

It takes time to download and install macOS, so make sure you're plugged into AC power and have a reliable Internet connection.

These installers from the App Store will open automatically after you've downloaded them:

  • macOS Catalina 10.15 can upgrade Mojave, High Sierra, Sierra, El Capitan, Yosemite or Mavericks
  • macOS Mojave 10.14 can upgrade High Sierra, Sierra, El Capitan, Yosemite, Mavericks or Mountain Lion
  • macOS High Sierra 10.13 can upgrade Sierra, El Capitan, Yosemite, Mavericks, Mountain Lion or Lion

Your web browser will download the following older installers as a disk image called InstallOS.dmg or InstallMacOSX.dmg. Open the disk image, then open the .pkg installer inside the disk image. It will install an app named Install [Version Name]. Open that app from your Applications folder to start installing the operating system.

  • macOS Sierra 10.12 can upgrade El Capitan, Yosemite, Mavericks, Mountain Lion or Lion
  • OS X El Capitan 10.11 can upgrade Yosemite, Mavericks, Mountain Lion, Lion or Snow Leopard
  • OS X Yosemite 10.10can upgrade Mavericks, Mountain Lion, Lion or Snow Leopard

Install macOS

Follow the onscreen instructions in the installer. It may be easiest to start the installation in the evening so that it can be completed overnight, if needed.

If the installer asks for permission to install a helper tool, enter the administrator name and password that you use to log in to your Mac, then click Add Helper.

Please allow installation to complete without putting your Mac to sleep or closing its lid. Your Mac might restart, show a progress bar or show a blank screen several times as it installs both macOS and related updates to your Mac firmware. Sql server 2008 free download for mac 64-bit.

Learn more

You may also be able to use macOS Recovery to reinstall the macOS you're using now, upgrade to the latest compatible macOS, or install the macOS that came with your Mac.

Apple’s new macOS Mojave doesn’t support the old Macs prior to 2012. It was a shocking news for me too.

You may also like to read the following posts:

I have an old, not for me actually, MacBook Pro which I purchased at the end of 2010. I was expecting Apple won’t drop the support of Mojave for MacBook Pro 2010 model, at least not for this time. But I was wrong. The latest Majove doesn’t support it too.

There is no need to worry. Even the oldest Windows 95 can be installed on Mac computer. There is a solution to every problem.

I don’t want to upgrade my MacBook Pro right now, especially when a new model is rumored to be released in next month.

Another choice for me was to buy a graphics card which supports Metal. In fact, it was the most feasible solution for to get installed Majove on my unsupported Mac right now.

Metal is natively supported by all Macs introduced since 2012. It means the following Nvidia, AMD and Intel family cards are compatible.

-Intel HD Graphics 400, Iris 5000 & 6000 family

-Nvidia GT 600M, 700M family

-AMD R9 M family

Pro

To check which GPU (graphics processing unit) is installed on your Mac computer, click on the Apple icon in the top left corner and then click on “About This Mac”.

There are a number of third-party vendors which sell graphics cards with integrated Metal support specifically designed for Mac computers. While searching for a compatible graphics card, I found that I could install Mojave on my MacBook Pro Mid 2010 model by using a software known as macOS Mojave Patcher Tool. Kudos to DosDude1 who developed tested, and released it as a free app.

By using this software, we could install the latest macOS version on early 2008 Macs.

Here is the step by step method to run Mojave on unsupported Macs.

The whole process can be divided into four parts.

  • Part 1. Getting all the required things
  • Part 2. Downloading the macOS Mojave Installer App
  • Part 3. Making a bootable Mojave USB drive
  • Part 4. Installing and Patching Mojave OS on the unsupported computer

We will discuss each part in details in the following paragraphs.

Part 1: Requirements to Run Mojave on Old Macs

Four things are required to get macOS Mojave installed on your forgotten-by-Apple Mac.

  1. Your Mac computer

It could be an early-2008 or newer Mac Pro, iMac, or MacBook Pro. The following models include under this category.

– MacPro3,1
– MacPro4,1
– iMac8,1
– iMac9,1
– iMac10,x
– iMac11,x
– iMac12,x
– MacBookPro4,1
– MacBookPro5,x
– MacBookPro6,x
– MacBookPro7,1
– MacBookPro8,x

It could be late-2008 or newer MacBook Air or Aluminum Unibody MacBook. The following models include under this category:

– MacBookAir2,1
– MacBookAir3,x
– MacBookAir4,x
– MacBook5,1

It could be early-2009 or newer Mac Mini or white MacBook including the following models:

– Macmini3,1
– Macmini4,1
– Macmini5,x
– MacBook5,2
– MacBook6,1
– MacBook7,1

And it could be Xserve2, 1 and Xserver3, 1.

  1. A USB drive in 16GB size or above
  2. macOS Mojave patcher tool. Download it here.
  3. A copy of the Mojave software.

Part 2: Download macOS Mojave Installer Software

MacOS Mojave software can be downloaded as an Installer App from Mac App Store using the computer which supports Mojave.

If you don’t have Mojave supported Mac, you can download the Mojave Installer App using patcher tool. Open the macOS Mojave patcher tool. If it doesn’t open and says it is from an unidentified developer, right click on the tool’s icon and click on “Open” from sub-menu and then enter your Mac’s Admin name and password. After the verification, you can open it with the left double-click.

If you don’t remember your macOS password, here are the solutions to reset it.

Go to Tools in the Menu bar and then hit “Download macOS Mojave”.

I recommend using the built-in downloader tool because it will download the latest and the compatible Installer app.

Mojave Installer app is about 5-6GB in size and it may take some time depending on the speed of your internet.

If the internet connection interrupts while downloading the file, don’t worry. The downloading process will resume where it left. Simply download the Mojave software again but point it to the same location where you were already downloading and saving the installer app.

Part 3: Create a Bootable Mojave USB Drive

In order to create a bootable Mojave USB Installer drive, follow these steps.

Step 1: Insert 16GB or above USB drive into your USB port of your Mac.

Step 2: Open Disk Utility and erase the USB drive in OS X Extended (Journaled) format. Give a proper name before erasing. I gave the name “macOS Mojave” to my USB drive.

If you are new to Mac, get the basic information about how to make a Partition, erase the current partition and how to make a bootable USB drive.

Step 3: After the drive is erased, open “macOS Mojave Patcher” tool.

Step 4: Point the Patcher tool to the downloaded Mojave Installer app which is downloaded in Part 2.

Step 5: Now select the target USB drive you just formatted.

Step 6: Hit the “Start Operation” button on the patcher tool and let it make the USB bootable with Mojave.

Step 7: It will show “Complete” when the process is done.

Part 4: Installing and Patching macOS Mojave

In this fourth and final part, we will install and patch the macOS Mojave on our old Mac computer. Follow the steps below to complete the remaining procedure.

Macbook Pro Sierra Os Download

Step 1. Restart your computer and hold down the “Option” key as soon as the Mac starts up.

Step 2: Select the USB drive, which was named as “macOS Mojave” as the startup disk.

Mid 2009 Macbook Pro Sierra

Step 3: If you want to upgrade your current macOS to macOS Mojave, simply use the continue button to proceed and follow step 5. But if you want to install it on another partition or want to erase the current partition first, then follow the Step 4.

Step 4: Open Disk Utility from the bottom left panel.

2009 Macbook Pro For Sale

Select the volume you want to erase. Use Mac OS Extended (Journaled) format. Or if you have got late-2009 and later machines with SSD drives, you can also use APFS format.

2009

If you don’t want to install Mojave on current volume, you can also create a new partition and install it there. Mojave takes approximately 18GB space on hard drive. So at least make a 25GB partition to test the new macOS.

If you want to use it for all routine work, set the partition size according to your needs.

Step 5: Select the volume and press “Continue” to begin the installation process.

Step 6: The installation process takes about 20 minutes to complete. When it is done, reboot your Mac back into installer drive while holding down the “Option” key again.

Step 7: This time select “macOS Post Install” app from the bottom left panel.

Step 8: Select the model of your computer and the volume on which you installed Mojave and then click the “Patch” button. The tool will automatically select the required patches according to the model of your computer.

Step 9: Press the “Reboot” button when the patch is complete.

High Sierra Macbook Pro 2011

Step 10: The computer will reboot with macOS Mojave installed on it.

Step 11. If it doesn’t work properly on the restart, boot your Mac back into the installer USB drive, select macOS Post Install again, and this time also select “Force Cache Rebuild” option. Once the patch is complete and the cache is rebuilt, reboot.

Download Sierra To Macbook Pro 2009 Macbook Pro

Step 12: Upon restart, complete the setup process and start using your Mac with a Mojave operating system.

Happy Mojaving!!

For additional information and to know more about the known issues, please visit DosDune1’s website. He is an awesome guy.

Note: You will see a new “Patch Updater” app in the Applications under “Other” folder. It will alert you when new patches are available for your computer.

Your Mac will get the future Mojave updates as other supported computer do. If you don’t see the updates, or your computer doesn’t work properly after applying the update, use the step 11 of Part 4 to enable all patches.